Liczba postów: 39
Liczba wątków: 5
Dołączył: Jan 2022
Reputacja:
System: 20.2 Uma
Miernik podziękowań 0%
26-01-2022, 12:10
(Ten post był ostatnio modyfikowany: 26-01-2022, 12:16 przez Stanj115.)
0 Cześć,
używam jądra 5.15.13-051513. Kilka dni temu pospiesznie zatwierdziłem aktualizację jądra 5.13 i rozpoczęły się problemy z połączneniem z Wifi, choć jest komunikat że podłączono. Po kilku włączeniach i wyłączeniach zaczęło działać, kilka dni działało bezproblemowo, a dziś nie działa w ogóle. Prośba o pomoc.
Kod: stanislaw@stanislaw-VivoBook-ASUSLaptop-X513EAN-X513EA:~$ inxi -Fxz
System:
Kernel: 5.15.13-051513-generic x86_64 bits: 64 compiler: N/A
Desktop: Cinnamon 5.0.7 Distro: Linux Mint 20.2 Uma
base: Ubuntu 20.04 focal
Machine:
Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X513EAN_X513EA
v: 1.0 serial: <filter>
Mobo: ASUSTeK model: X513EAN v: 1.0 serial: <filter>
UEFI: American Megatrends LLC. v: X513EAN.201 date: 05/31/2021
Battery:
ID-1: BAT0 charge: 35.4 Wh condition: 41.7/42.1 Wh (99%)
model: ASUSTeK ASUS Battery status: Discharging
Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
charge: 55% (should be ignored) status: Discharging
CPU:
Topology: Dual Core model: 11th Gen Intel Core i3-1115G4 bits: 64
type: MT MCP arch: Tiger Lake rev: 1 L2 cache: 6144 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 23961
Speed: 951 MHz min/max: 400/4100 MHz Core speeds (MHz): 1: 951 2: 804
3: 1021 4: 962
Graphics:
Device-1: Intel vendor: ASUSTeK driver: i915 v: kernel
bus ID: 0000:00:02.0
Display: x11 server: X.Org 1.20.13 driver: modesetting
unloaded: fbdev,vesa resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics (TGL GT2) v: 4.6 Mesa 21.0.3
direct render: Yes
Audio:
Device-1: Intel vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 0000:00:1f.3
Sound Server: ALSA v: k5.15.13-051513-generic
Network:
Device-1: MEDIATEK vendor: AzureWave driver: mt7921e v: kernel port: efa0
bus ID: 0000:02:00.0
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus ID: 2-2.4:5
IF: enx00249b25dfdc state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 238.47 GiB used: 32.41 GiB (13.6%)
ID-1: /dev/nvme0n1 vendor: Kingston model: OM8PDP3256B-AB1
size: 238.47 GiB
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller
driver: vmd v: 0.6 bus ID: 0000:00:0e.0
Partition:
ID-1: / size: 233.24 GiB used: 32.41 GiB (13.9%) fs: ext4
dev: /dev/nvme0n1p2
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Info:
Processes: 243 Uptime: 13m Memory: 7.46 GiB used: 1.72 GiB (23.0%)
Init: systemd runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17
inxi: 3.0.38
stanislaw@stanislaw-VivoBook-ASUSLaptop-X513EAN-X513EA:~$
Dodano po pewnym czasie:
Liczba postów: 4 206
Liczba wątków: 76
Dołączył: Dec 2018
Reputacja:
System: Inny
Środowisko graficzne: Xfce
Architektura CPU: 64bit
Inny System: Debian testing/sid
Miernik podziękowań 39%
0 Proszę podać wynik skryptu zgodnie z zasadami forum.
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
Liczba postów: 39
Liczba wątków: 5
Dołączył: Jan 2022
Reputacja:
System: 20.2 Uma
Miernik podziękowań 0%
26-01-2022, 15:17
(Ten post był ostatnio modyfikowany: 26-01-2022, 15:29 przez Stanj115.)
0 (26-01-2022, 12:24)yahoob3 napisał(a): Przydatny byłby wynik działania skryptu z tego poradnika: https://forum.linuxmint.pl/showthread.ph...78#pid1078
Od biedy możesz uruchomić system na jądrze, które "działało", usunąć nowsze jądra (Menedżer aktualizacji, Widok, Jądra Linuksa) i chwilowo dodać aktualizacje jądra do czarnej listy wg tego poradnika: https://forum.linuxmint.pl/showthread.ph...82#pid2982 przy czym wpisy będą tylko dwa: linux, linux-*.
W załączeniu wireless-info
Kod: ########## wireless info START ##########
Report from: 26 Jan 2022 14:10 CET +0100
Booted last: 26 Jan 2022 00:00 CET +0100
Script from: 25 Jan 2020 03:34 UTC +0000
##### release ###########################
Distributor ID: Linuxmint
Description: Linux Mint 20.2
Release: 20.2
Codename: uma
##### kernel ############################
Linux 5.15.13-051513-generic #202201071026-Ubuntu SMP Fri Jan 7 16:52:09 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash
##### desktop ###########################
Cinnamon
##### lspci #############################
0000:02:00.0 Network controller [0280]: MEDIATEK Corp. Device [14c3:7961]
DeviceName: WLAN
Subsystem: AzureWave Device [1a3b:4680]
##### lsusb #############################
Bus 002 Device 007: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 006: ID 05e3:0617 Genesys Logic, Inc. USB3.0 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:56a8 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 010: ID 0835:2a01 Action Star Enterprise Co., Ltd
Bus 001 Device 009: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 006: ID 13d3:3563 IMC Networks Wireless_Device
Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: asus-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### secure boot #######################
SecureBoot disabled
Platform is in Setup Mode
##### lsmod #############################
asus_nb_wmi 28672 0
asus_wmi 40960 1 asus_nb_wmi
platform_profile 16384 1 asus_wmi
mac80211 1224704 3 mt76,mt7921e,mt76_connac_lib
wmi_bmof 16384 0
sparse_keymap 16384 1 asus_wmi
cfg80211 958464 4 mt76,mt7921e,mac80211,mt76_connac_lib
libarc4 16384 1 mac80211
wmi 32768 2 asus_wmi,wmi_bmof
video 53248 2 asus_wmi,i915
##### interfaces ########################
[/etc/network/interfaces]
source-directory /etc/network/interfaces.d
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether <MAC 'wlo1' [IF1]> brd <MAC address>
altname wlp2s0
5: enx<IF from MAC [IF2]>: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether <MAC 'enx<IF from MAC [IF2]>' [IF2]> brd <MAC address>
inet 192.168.1.22/24 brd 192.168.1.255 scope global dynamic noprefixroute enx<IF from MAC [IF2]>
valid_lft 85201sec preferred_lft 85201sec
inet6 fe80::2656:e4d8:93ad:2b9e/64 scope link noprefixroute
valid_lft forever preferred_lft forever
##### iwconfig ##########################
lo no wireless extensions.
enx<IF from MAC [IF2]> no wireless extensions.
wlo1 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=3 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
##### route #############################
default via 192.168.1.1 dev enx<IF from MAC [IF2]> proto dhcp metric 100
169.254.0.0/16 dev enx<IF from MAC [IF2]> scope link metric 1000
192.168.1.0/24 dev enx<IF from MAC [IF2]> proto kernel scope link src 192.168.1.22 metric 100
##### resolv.conf #######################
[777 root '/etc/resolv.conf' -> '../run/systemd/resolve/stub-resolv.conf']
nameserver 127.0.0.53
options edns0 trust-ad
search home
##### network managers ##################
Installed:
NetworkManager
Running:
root 611 1 0 10:55 ? 00:00:16 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: enx<IF from MAC [IF2]>
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/5
GENERAL.VENDOR: Realtek Semiconductor Corp.
GENERAL.PRODUCT: RTL8153 Gigabit Ethernet Adapter
GENERAL.DRIVER: r8152
GENERAL.DRIVER-VERSION: v1.12.12
GENERAL.FIRMWARE-VERSION: rtl8153a-3 v2 02/07/20
GENERAL.HWADDR: <MAC 'enx<IF from MAC [IF2]>' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.IP4-CONNECTIVITY: 4 (full)
GENERAL.IP6-CONNECTIVITY: 3 (limited)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/net/enx<IF from MAC [IF2]>
GENERAL.IP-IFACE: enx<IF from MAC [IF2]>
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Połączenie przewodowe 1
GENERAL.CON-UUID: bb24b72b-9c5a-3f09-8308-52051d8fd960
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/9
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: 1000 Mb/s
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
INTERFACE-FLAGS.UP: yes
INTERFACE-FLAGS.LOWER-UP: yes
INTERFACE-FLAGS.CARRIER: yes
WIRED-PROPERTIES.CARRIER: on
IP4.ADDRESS[1]: 192.168.1.22/24
IP4.GATEWAY: 192.168.1.1
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.1.1, mt = 100
IP4.ROUTE[2]: dst = 192.168.1.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.1.1
IP4.DOMAIN[1]: home
DHCP4.OPTION[1]: dhcp_lease_time = 86400
DHCP4.OPTION[2]: domain_name = home
DHCP4.OPTION[3]: domain_name_servers = 192.168.1.1
DHCP4.OPTION[4]: expiry = 1643287831
DHCP4.OPTION[5]: ip_address = 192.168.1.22
DHCP4.OPTION[6]: next_server = 192.168.1.1
DHCP4.OPTION[7]: requested_broadcast_address = 1
DHCP4.OPTION[8]: requested_domain_name = 1
DHCP4.OPTION[9]: requested_domain_name_servers = 1
DHCP4.OPTION[10]: requested_domain_search = 1
DHCP4.OPTION[11]: requested_host_name = 1
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[14]: requested_nis_domain = 1
DHCP4.OPTION[15]: requested_nis_servers = 1
DHCP4.OPTION[16]: requested_ntp_servers = 1
DHCP4.OPTION[17]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[18]: requested_root_path = 1
DHCP4.OPTION[19]: requested_routers = 1
DHCP4.OPTION[20]: requested_static_routes = 1
DHCP4.OPTION[21]: requested_subnet_mask = 1
DHCP4.OPTION[22]: requested_time_offset = 1
DHCP4.OPTION[23]: requested_wpad = 1
DHCP4.OPTION[24]: routers = 192.168.1.1
DHCP4.OPTION[25]: subnet_mask = 255.255.255.0
IP6.ADDRESS[1]: fe80::2656:e4d8:93ad:2b9e/64
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/5
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: bb24b72b-9c5a-3f09-8308-52051d8fd960 | Połączenie przewodowe 1
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.NM-TYPE: NMDeviceWifi
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/2
GENERAL.VENDOR: MEDIATEK Corp.
GENERAL.PRODUCT: --
GENERAL.DRIVER: mt7921e
GENERAL.DRIVER-VERSION: 5.15.13-051513-generic
GENERAL.FIRMWARE-VERSION: ____010000-20211014150922
GENERAL.HWADDR: <MAC 'wlo1' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.IP4-CONNECTIVITY: 1 (none)
GENERAL.IP6-CONNECTIVITY: 1 (none)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/net/wlo1
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
INTERFACE-FLAGS.UP: no
INTERFACE-FLAGS.LOWER-UP: no
INTERFACE-FLAGS.CARRIER: no
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
WIFI-PROPERTIES.AP: no
WIFI-PROPERTIES.ADHOC: no
WIFI-PROPERTIES.2GHZ: yes
WIFI-PROPERTIES.5GHZ: yes
WIFI-PROPERTIES.MESH: no
WIFI-PROPERTIES.IBSS-RSN: no
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
SSID BSSID MODE CHAN FREQ RATE SIGNAL BARS SECURITY ACTIVE IN-USE
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:gsm,except:type:cdma
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/Automatyczne Orange_Swiatlowod_2F30.nmconnection]] (600 root)
[connection] id=Automatyczne Orange_Swiatlowod_2F30 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=Orange_Swiatlowod_2F30
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Orange_Swiatlowod_87A0.nmconnection]] (600 root)
[connection] id=Orange_Swiatlowod_87A0 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=Orange_Swiatlowod_87A0
[ipv4] method=auto
[ipv6] method=auto
##### Netplan config ####################
[/etc/netplan/1-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
Region: Europe/Warsaw (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20), (N/A)
(2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
enx<IF from MAC [IF2]> no frequency information.
wlo1 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 14 : 2.484 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
##### iwlist scan #######################
lo Interface doesn't support scanning.
wlo1 Interface doesn't support scanning : Network is down
enx<IF from MAC [IF2]> Interface doesn't support scanning.
##### module infos ######################
[mac80211]
filename: /lib/modules/5.15.13-051513-generic/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
depends: cfg80211,libarc4
retpoline: Y
intree: Y
name: mac80211
vermagic: 5.15.13-051513-generic SMP mod_unload modversions
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/5.15.13-051513-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 5.15.13-051513-generic SMP mod_unload modversions
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[11362.299896] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11362.922518] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11402.300370] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11402.652104] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:22:c6:c7:f4:ca:38:08:00 SRC=192.168.1.20 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=18401 PROTO=2
[11402.652258] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:22:c6:c7:f4:ca:38:08:00 SRC=192.168.1.20 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=58499 PROTO=2
[11442.300489] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11448.132313] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11482.300934] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11490.981483] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11522.301312] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11532.358761] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11562.301793] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11564.823822] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11602.302156] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11611.049214] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11642.303224] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11645.610254] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[11682.304087] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:01:e8:d2:ff:d2:2f:30:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[11685.491409] [UFW BLOCK] IN=enx<IF from MAC [IF2]> OUT= MAC=01:00:5e:00:00:fb:cc:b1:1a:1a:55:10:08:00 SRC=192.168.1.16 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
########## wireless info END ############
Cały czas jadę na jądrze 5.15, więc nie rozumiem co przypadkowa aktualizacja 5.13 mogła zmienić. Rano też usunąłem jądra 5.13 (dziwne bo obecnie nadal są widoczne), lecz nie pomogło.
Dodano po pewnym czasie:
Teraz po odłączeniu kabla przestał widzieć wifi :-(
Dodano po pewnym czasie:
Liczba postów: 2 530
Liczba wątków: 24
Dołączył: Jan 2019
Reputacja:
System: 21.3 Virginia
Środowisko graficzne: Cinnamon
Architektura CPU: 64bit
Miernik podziękowań 24%
0 Pisałem o jądrach serii 5.15. Na jednym z nich (tym starszym) wifi działało.
Pokaż zainstalowane jądra serii 5.15.
Liczba postów: 39
Liczba wątków: 5
Dołączył: Jan 2022
Reputacja:
System: 20.2 Uma
Miernik podziękowań 0%
0
Nie było aktualizacji 5.15 w ostatnim czasie i do czasu feralnej aktualizacji 5.13 wszystko działało na tym jądrze.
Liczba postów: 86
Liczba wątków: 23
Dołączył: Nov 2021
Reputacja:
System: Inny
Środowisko graficzne: GNOME
Architektura CPU: 64bit
Inny System: Vanilla OS
Miernik podziękowań 0%
0 Jedyną opcją na chwilę obecną jest TimeShift.
Internet mówi, że problemy ze sterownikem mt7921e są powszechne.
A z aktualizacją do jądra 5.16 byłbym ostrożny.
https://lore.kernel.org/netdev/5cee9a36-...ing.org/t/
Tutaj jest przypadek dotyczący jądra 5.16 gdzie ten sterownik wywołuje komunikat "Kernel panic" oznacza to, że może spowodować błąd jądra i tym samym uniemożliwić rozruch systemu.
Liczba postów: 39
Liczba wątków: 5
Dołączył: Jan 2022
Reputacja:
System: 20.2 Uma
Miernik podziękowań 0%
26-01-2022, 18:31
(Ten post był ostatnio modyfikowany: 26-01-2022, 18:33 przez Stanj115.)
0 Dzięki. Mam kilka migawek od 20.01 do 25.01, ale w każdej z nich katalog root jest pusty. Wcześniejszych nie ma. Wydaje mi się że aktualizacja ta następowała w dniach 20-22.01. Jest szansa to jakoś sprawdzić?
Liczba postów: 4 206
Liczba wątków: 76
Dołączył: Dec 2018
Reputacja:
System: Inny
Środowisko graficzne: Xfce
Architektura CPU: 64bit
Inny System: Debian testing/sid
Miernik podziękowań 39%
26-01-2022, 18:41
(Ten post był ostatnio modyfikowany: 26-01-2022, 18:41 przez dedito.)
0 Kod: sudo rmmod mt7921e && sudo modprobe mt7921e && dmesg | tail
Liczba postów: 39
Liczba wątków: 5
Dołączył: Jan 2022
Reputacja:
System: 20.2 Uma
Miernik podziękowań 0%
0 (26-01-2022, 18:41)dedito napisał(a): Kod: sudo rmmod mt7921e && sudo modprobe mt7921e && dmesg | tail
Kod: stanislaw@stanislaw-VivoBook-ASUSLaptop-X513EAN-X513EA:~$ sudo rmmod mt7921e && sudo modprobe mt7921e && dmesg | tail
[sudo] hasło użytkownika stanislaw:
dmesg: odczyt bufora jądra nie powiódł się: Operacja niedozwolona
Pozytyw operacji jest taki, że zaczął widzieć wifi, nawet na chwilę się połączył i za chwilę się znów rozłączył.
|