Problem z dźwiękiem 5.1 przez DP/HDMI

[miras_1987]

0

Cześć!

Usiłuję zmusić terminal HP T630 z DisplayPort do współpracy z telewizorem Philips i amplitunerem Yamaha RX-V373, tak aby uzyskać dźwięk 5.1 (w obu HDMI i HDMI ARC). Podłączenie komputer -> TV -> ampli zawsze kończy się uzyskaniem sygnału 2.0 (tak przez HDMI, jak złącze optyczne). Podłączenie komputer -> ampli -> TV nie generuje ani sygnału audio ani video (tak miałem podpięty poprzedni sprzęt). Czy macie może pomysł, w którym kierunku ruszyć z tematem? 

Kod:

tv@tv-HP-t630-Thin-Client:~$ inxi -Fxz
System:
  Kernel: 5.15.0-76-generic x86_64 bits: 64 compiler: gcc v: 11.3.0
    Desktop: Cinnamon 5.8.4 Distro: Linux Mint 21.2 Victoria
    base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop System: HP product: HP t630 Thin Client v: N/A
    serial: <superuser required>
  Mobo: HP model: 8158 v: A01 serial: <superuser required> UEFI: AMI
    v: M40 v01.12 date: 02/04/2020
CPU:
  Info: quad core model: AMD Embedded G-Series GX-420GI Radeon R7E bits: 64
    type: MT MCP arch: Excavator rev: 1 cache: L1: 320 KiB L2: 2 MiB
  Speed (MHz): avg: 1501 high: 2117 min/max: 900/2000 boost: enabled cores:
    1: 898 2: 896 3: 2096 4: 2117 bogomips: 15969
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Wani [Radeon R5/R6/R7 Graphics] vendor: Hewlett-Packard
    driver: amdgpu v: kernel bus-ID: 00:01.0
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
    unloaded: fbdev,modesetting,vesa gpu: amdgpu resolution: 1920x1080~60Hz
  OpenGL:
    renderer: CARRIZO (carrizo LLVM 15.0.7 DRM 3.42 5.15.0-76-generic)
    v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes
Audio:
  Device-1: AMD Kabini HDMI/DP Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:01.1
  Device-2: AMD Family 15h Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:09.2
  Sound Server-1: ALSA v: k5.15.0-76-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel port: e000 bus-ID: 01:00.0
  IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel bus-ID: 02:00.0
  IF: wlp2s0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 2-4:3
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
    bt-v: 2.1 lmp-v: 4.2
Drives:
  Local Storage: total: 119.24 GiB used: 16.33 GiB (13.7%)
  ID-1: /dev/sda vendor: LITE-ON model: CV3-8D128-11 SATA 128GB
    size: 119.24 GiB
Partition:
  ID-1: / size: 116.32 GiB used: 16.32 GiB (14.0%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 42.6 C mobo: N/A gpu: amdgpu temp: 42.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 246 Uptime: 2h 4m Memory: 6.73 GiB used: 1.64 GiB (24.4%)
  Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2276 Shell: Bash
  v: 5.1.16 inxi: 3.3.13
tv@tv-HP-t630-Thin-Client:~$ pacmd list-cards
2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_01.1>
    driver: <module-alsa-card.c>
    owner module: 7
    properties:
        alsa.card = "0"
        alsa.card_name = "HDA ATI HDMI"
        alsa.long_card_name = "HDA ATI HDMI at 0xfeb64000 irq 40"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:01.1"
        sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "9840"
        device.product.name = "Kabini HDMI/DP Audio"
        device.form_factor = "internal"
        device.string = "0"
        device.description = "Wbudowany dźwięk"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        output:hdmi-stereo: Wyjście Digital Stereo (HDMI) (priority 900, available: no)
        output:hdmi-surround: Wyjście Digital Surround 5.1 (HDMI) (priority 3800, available: no)
        output:hdmi-surround71: Wyjście Digital Surround 7.1 (HDMI) (priority 800, available: no)
        output:hdmi-stereo-extra1: Wyjście Digital Stereo (HDMI 2) (priority 33468, available: unknown)
        output:hdmi-surround-extra1: Wyjście Digital Surround 5.1 (HDMI 2) (priority 36368, available: unknown)
        off: Wyłączone (priority 0, available: unknown)
    active profile: <output:hdmi-surround-extra1>
    sinks:
        alsa_output.pci-0000_00_01.1.hdmi-surround-extra1/#4: Wbudowany dźwięk Digital Surround 5.1 (HDMI 2)
    sources:
        alsa_output.pci-0000_00_01.1.hdmi-surround-extra1.monitor/#4: Monitor of Wbudowany dźwięk Digital Surround 5.1 (HDMI 2)
    ports:
        hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "video-display"
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "video-display"
                device.product.name = "PHILIPS FTV"
    index: 1
    name: <alsa_card.pci-0000_00_09.2>
    driver: <module-alsa-card.c>
    owner module: 8
    properties:
        alsa.card = "1"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfeb60000 irq 41"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:09.2"
        sysfs.path = "/devices/pci0000:00/0000:00:09.2/sound/card1"
        device.bus = "pci"
        device.vendor.id = "1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        device.product.id = "157a"
        device.product.name = "Family 15h (Models 60h-6fh) Audio Controller"
        device.form_factor = "internal"
        device.string = "1"
        device.description = "Wbudowany dźwięk"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    profiles:
        input:analog-stereo: Wejście Analogowe stereo (priority 15, available: no)
        output:analog-stereo: Wyjście Analogowe stereo (priority 34268, available: unknown)
        output:analog-stereo+input:analog-stereo: Analogowy dupleks stereo (priority 1515, available: unknown)
        off: Wyłączone (priority 0, available: unknown)
    active profile: <off>
    ports:
        analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-input-microphone"
        analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
            properties:
                
        analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-speakers"
        analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-headphones"
tv@tv-HP-t630-Thin-Client:~$ pacmd list-sinks
1 sink(s) available.
  * index: 4
    name: <alsa_output.pci-0000_00_01.1.hdmi-surround-extra1>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: RUNNING
    suspend cause: (none)
    priority: 9030
    volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB,   rear-left: 65536 / 100% / 0.00 dB,   rear-right: 65536 / 100% / 0.00 dB,   front-center: 65536 / 100% / 0.00 dB,   lfe: 65536 / 100% / 0.00 dB
            balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 2.38 ms
    max request: 1 KiB
    max rewind: 1 KiB
    monitor source: 4
    sample spec: s16le 6 k 44100 Hz
    channel map: front-left,front-right,rear-left,rear-right,front-center,lfe
                 Przestrzenne 5.1
    used by: 1
    linked by: 1
    configured latency: 2.51 ms; range is 1.00 .. 1999.82 ms
    card: 0 <alsa_card.pci-0000_00_01.1>
    module: 7
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "HDMI 1"
        alsa.id = "HDMI 1"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "7"
        alsa.card = "0"
        alsa.card_name = "HDA ATI HDMI"
        alsa.long_card_name = "HDA ATI HDMI at 0xfeb64000 irq 40"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:01.1"
        sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
        device.bus = "pci"
        device.vendor.id = "1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "9840"
        device.product.name = "Kabini HDMI/DP Audio"
        device.form_factor = "internal"
        device.string = "hdmi:0,1"
        device.buffering.buffer_size = "1058304"
        device.buffering.fragment_size = "529152"
        device.access_mode = "mmap+timer"
        device.profile.name = "hdmi-surround-extra1"
        device.profile.description = "Digital Surround 5.1 (HDMI 2)"
        device.description = "Wbudowany dźwięk Digital Surround 5.1 (HDMI 2)"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
            properties:
                device.icon_name = "video-display"
                device.product.name = "PHILIPS FTV"
    active port: <hdmi-output-1>
tv@tv-HP-t630-Thin-Client:~$ aplay -l
**** Lista PLAYBACK urządzeń ****
karta 0: HDMI [HDA ATI HDMI], urządzenie 3: HDMI 0 [HDMI 0]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0
karta 0: HDMI [HDA ATI HDMI], urządzenie 7: HDMI 1 [HDMI 1]
  Urządzenia podrzędne: 0/1
  Urządzenie podrzędne #0: subdevice #0
karta 1: Generic [HD-Audio Generic], urządzenie 0: ALC255 Analog [ALC255 Analog]
  Urządzenia podrzędne: 1/1
  Urządzenie podrzędne #0: subdevice #0

[sęk]

0

Zaktualizuj kernel na pewno nie zaszkodzi https://ubuntu.com/kernel/lifecycle

Kod:

sudo apt update
sudo apt-get install --install-recommends linux-generic-hwe-22.04

wejdź w opcje dźwięku   i poprzestawiaj wyjścia hdmi ja mam np. do wyboru 2, 5.1, i 7 i musze przełączać za każdym razem żeby załapał dźwięk z amplitunera no i trzeba jeszcze wybrać w ustawieniach tv i apli dzwięk 5.1 xD

[mati75]

0

Ewentualnie wersję z pakietu linux-generic-hwe-22.04-edge bym jeszcze spróbował, będzie 6.5 zamiast 6.2

[miras_1987]

0

W opcjach dźwięku wszystko ustawione na 5.1 - nie bangla. Aktualizacja kernela skutkuje zielonym ekranem przy bezpośrednim wpięciu w monitor/tv- tym bardziej nie bangla xD przy wpięciu przez amplituner wciąż brak obrazu i dźwięku

[sęk]

0

Czy producent w ogóle wspomina o możliwościach karty dźwiękowej? może nie ma wsparcia 5.1 albo kable hdmi masz starego standardu, najlepsze byłyby hdmi 2.1. Pewnie używasz przejściówek które mogą ucinać zakresy, sprawdź u znajomych którzy mają dźwięk przestrzenny albo rozglądałbym sie za nowszym sprzętem albo zewnętrzną kartą dźwiękową.