0
Przepraszam, źle zrozumiałem zamieść (od zamiatać, umieść byłoby bardziej jednoznaczne).
Poniżej wyniki testów dla obu dysków
Poniżej wyniki testów dla obu dysków
Kod:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1059GSMP
Serial Number: Y1MGP1P1T
LU WWN Device Id: 5 000039 3a290aa9c
Firmware Version: GU001C
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Feb 14 00:24:08 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 252) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0027 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0023 100 100 002 Pre-fail Always - 3121
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6623
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 40
7 Seek_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 016 016 000 Old_age Always - 33942
10 Spin_Retry_Count 0x0033 232 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5510
183 Runtime_Bad_Block 0x0032 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 2077
188 Command_Timeout 0x0032 100 092 000 Old_age Always - 388
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 042 040 Old_age Always - 34 (Min/Max 27/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 156563
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 7667829
193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 200862
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2237 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2237 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 0a 08 74 c7 63 Error: UNC at LBA = 0x03c77408 = 63403016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 08 00 74 c7 40 00 01:12:34.284 READ FPDMA QUEUED
60 08 f8 e0 2a 68 40 00 01:12:34.258 READ FPDMA QUEUED
61 08 f0 d0 c5 03 40 00 01:12:34.258 WRITE FPDMA QUEUED
ec 00 00 00 00 00 a0 00 01:12:34.203 IDENTIFY DEVICE
61 20 e0 78 22 70 40 00 01:12:34.170 WRITE FPDMA QUEUED
Error 2236 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 6a 08 74 c7 63 Error: WP at LBA = 0x03c77408 = 63403016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 c8 40 36 2d 40 00 01:12:30.439 WRITE FPDMA QUEUED
60 08 c0 e0 2a 68 40 00 01:12:30.425 READ FPDMA QUEUED
60 08 b8 70 31 68 40 00 01:12:30.424 READ FPDMA QUEUED
60 08 b0 88 2e 68 40 00 01:12:30.420 READ FPDMA QUEUED
60 08 a8 60 31 68 40 00 01:12:30.419 READ FPDMA QUEUED
Error 2235 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 8a 08 74 c7 63 Error: UNC at LBA = 0x03c77408 = 63403016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 88 00 74 c7 40 00 01:12:25.731 READ FPDMA QUEUED
61 08 80 28 c4 64 40 00 01:12:25.231 WRITE FPDMA QUEUED
61 20 78 c0 df 86 40 00 01:12:25.231 WRITE FPDMA QUEUED
61 20 70 20 40 bb 40 00 01:12:25.231 WRITE FPDMA QUEUED
60 20 68 20 c4 64 40 00 01:12:25.230 READ FPDMA QUEUED
Error 2234 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 f2 08 74 c7 63 Error: UNC at LBA = 0x03c77408 = 63403016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 f8 10 e6 d4 40 00 01:12:20.865 READ FPDMA QUEUED
60 20 f0 00 74 c7 40 00 01:12:20.865 READ FPDMA QUEUED
61 20 e0 40 3c bb 40 00 01:12:20.865 WRITE FPDMA QUEUED
61 08 08 d0 c5 03 40 00 01:12:20.865 WRITE FPDMA QUEUED
ef 90 03 00 00 00 a0 00 01:12:20.865 SET FEATURES [Disable SATA feature]
Error 2233 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 d2 08 74 c7 63 Error: UNC at LBA = 0x03c77408 = 63403016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 d0 00 74 c7 40 00 01:12:17.068 READ FPDMA QUEUED
61 18 c8 e0 e3 4b 40 00 01:12:17.066 WRITE FPDMA QUEUED
60 18 c0 c0 ae e9 40 00 01:12:17.065 READ FPDMA QUEUED
61 08 b8 d8 e3 4b 40 00 01:12:17.065 WRITE FPDMA QUEUED
60 08 b0 b8 ae e9 40 00 01:12:17.065 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 33942 -
# 2 Short offline Completed without error 00% 33942 -
# 3 Short offline Completed without error 00% 33936 -
# 4 Short offline Completed without error 00% 33936 -
# 5 Short offline Completed: read failure 90% 7390 834289152
# 6 Short offline Completed without error 00% 50 -
# 7 Short offline Completed without error 00% 41 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Kod:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1059GSMP
Serial Number: Y1MGP1P2T
LU WWN Device Id: 5 000039 3a290aa9d
Firmware Version: GU001C
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Feb 14 00:08:39 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0027 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0023 100 100 002 Pre-fail Always - 3118
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 8929
5 Reallocated_Sector_Ct 0x0033 098 098 010 Pre-fail Always - 376
7 Seek_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 016 016 000 Old_age Always - 33875
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5492
183 Runtime_Bad_Block 0x0032 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 210
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 071 047 040 Old_age Always - 29 (Min/Max 22/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 50654
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 23724394
193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 141892
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 40
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 6864
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 28296 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28296 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 02:37:04.906 READ DMA
ef 10 02 00 00 00 a0 00 02:37:04.898 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 02:37:02.786 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 02:37:00.676 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 02:37:00.675 SET FEATURES [Enable SATA feature]
Error 28295 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 02:36:54.164 READ DMA
ef 10 02 00 00 00 a0 00 02:36:54.164 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 02:36:52.053 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 02:36:49.942 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 02:36:49.942 SET FEATURES [Enable SATA feature]
Error 28294 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 02:36:43.431 READ DMA
ef 10 02 00 00 00 a0 00 02:36:43.431 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 02:36:41.319 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 02:36:39.209 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 02:36:39.208 SET FEATURES [Enable SATA feature]
Error 28293 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 02:36:32.686 READ DMA
ef 10 02 00 00 00 a0 00 02:36:32.686 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 02:36:30.575 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 02:36:28.464 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 02:36:28.464 SET FEATURES [Enable SATA feature]
Error 28292 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 02:36:21.953 READ DMA
ef 10 02 00 00 00 a0 00 02:36:21.953 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 02:36:19.841 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 02:36:17.730 SET FEATURES [Set transfer mode]
ef 10 02 00 00 00 a0 00 02:36:17.730 SET FEATURES [Enable SATA feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 33874 0
# 2 Short offline Completed: read failure 90% 33870 0
# 3 Short offline Completed without error 00% 7300 -
# 4 Short offline Completed without error 00% 7300 -
# 5 Short offline Completed without error 00% 445 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.