[SOLVED] HP Pavilion dv7

[gbk77]

0

Przez kilka lat działał bez problemów z kolejnymi Mint'ami (od 14 do 18).
Ostatnio pojawił się problem z HDD - są dwa dyski po 1 TB.
Sformatowałem gparted'em partycję 400 GB pod instalację 19.3
i przygotowałem oraz ISO na DVD 4,7 GB.
Ciężko się instalije DVD - Live ale... jakoś dostaję prawidłowy pulpit.
Jednak pełna instalacja zawiesza się na "4 kropce" instalatora
- przy wyborze/instalowaniu różnych narzędzi.
Nie pokazuje się dysko z wolną partycją - gotową do instalacji.
Kilka podejść z tym samym skutkiem.
Ewidentnie szwankują dyski ale.. mam nadzieję zainstalować 19.3 na wybranej partycji
przed formatowaniem był tam jakiś nieużywany Linux (może Arch).
Proszę o pomoc w zainstalowaniu 19.3

[dedito]

0

Skoro uważasz, że szwankują, to zamieść tablicę smart dysku.

[gbk77]

0

Skoro uważasz, że szwankują, to zamieść tablicę smart dysku.
[/quote]
Dzięki. A tak więcej technicznie a mniej żargonowo,
czyli co zrobić po kolei i przy pomocy czego?

[dedito]

1

Tablica SMART dysku to określenie jak najbardziej techniczne.
W sesji live jest dostępny program graficzny gsmartcontrol.

[gbk77]

0

Dzięki wielkie,
nie zauważyłem i nie doceniłem tego narzędzia
żargonowo zabrzmiało mi tylko "zamieść tablicę smart dysku".

[yahoob3]

0

Zainstaluj program, np. poleceniem sudo apt install gsmartcontrol, uruchom test:


a kiedy skończy wrzuć na forum (kliknij View output) to, co się wyświetli... coś jakto:

Kod:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SPCC Solid State Disk
Serial Number:    AA000000000000002231
Firmware Version: R0817A0
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Feb 13 17:54:44 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x11) SMART execute Offline immediate.
                    No Auto Offline data collection support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    No Selective Self-test supported.
SMART capabilities:            (0x0002)    Does not save SMART data before
                    entering power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   100   100   050    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   050    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   050    Old_age   Always       -       1267
12 Power_Cycle_Count       0x0032   100   100   050    Old_age   Always       -       707
160 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       0
161 Unknown_Attribute       0x0033   100   100   050    Pre-fail  Always       -       100
163 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       16
164 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       8284
165 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       29
166 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       6
167 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       17
168 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       7000
169 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       100
175 Program_Fail_Count_Chip 0x0032   100   100   050    Old_age   Always       -       0
176 Erase_Fail_Count_Chip   0x0032   100   100   050    Old_age   Always       -       0
177 Wear_Leveling_Count     0x0032   100   100   050    Old_age   Always       -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   050    Old_age   Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   050    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   050    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always       -       20
194 Temperature_Celsius     0x0022   100   100   050    Old_age   Always       -       40
195 Hardware_ECC_Recovered  0x0032   100   100   050    Old_age   Always       -       17441
196 Reallocated_Event_Count 0x0032   100   100   050    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   050    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0032   100   100   050    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   050    Old_age   Always       -       0
232 Available_Reservd_Space 0x0032   100   100   050    Old_age   Always       -       100
241 Total_LBAs_Written      0x0030   100   100   050    Old_age   Offline      -       32958
242 Total_LBAs_Read         0x0030   100   100   050    Old_age   Offline      -       37602
245 Unknown_Attribute       0x0032   100   100   050    Old_age   Always       -       30402

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1267         -

Selective Self-tests/Logging not supported

Pamiętaj, żeby użyć znaczników CODE - przepis w mojej sygnaturze.

[gbk77]

0

Tablica SMART dysku to określenie jak najbardziej techniczne.
W sesji live jest dostępny program graficzny gsmartcontrol.

Zastosowałem tego smarta ale... zasadniczo nie wykrył dużych problemów (skrócone testy, bo pełne wymagają kilku godzin). Nie ma tam żadnego zamiatania. Wykonałem te testy nie z 19.3 Live ale z odpalonego w trybie recovery 18.1. Nie wiem czy to pomoże w zainstalowaniu trwałego Mint'a 19.3. Próbuję...

[dedito]

0

Jak mamy przeanalizować ten zlepek tekstu?
Już lepszy byłby zrzut graficzny.
Przy okazji pokaż też zakładkę atributes.

Przy okazji jeszcze jakbyś te żargonowe zamiatanie przetłumaczył na język techniczny ?

[gbk77]

0

Przepraszam, źle zrozumiałem zamieść (od zamiatać, umieść byłoby bardziej jednoznaczne).
Poniżej wyniki testów dla obu dysków

Kod:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:    TOSHIBA MK1059GSMP
Serial Number:    Y1MGP1P1T
LU WWN Device Id: 5 000039 3a290aa9c
Firmware Version: GU001C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:  ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 14 00:24:08 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status:      (  0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (  120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (  2) minutes.
Extended self-test routine
recommended polling time: ( 252) minutes.
SCT capabilities:       (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x002f  100  100  050    Pre-fail  Always      -      0
  2 Throughput_Performance  0x0027  100  100  050    Pre-fail  Always      -      0
  3 Spin_Up_Time            0x0023  100  100  002    Pre-fail  Always      -      3121
  4 Start_Stop_Count        0x0032  100  100  000    Old_age  Always      -      6623
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      40
  7 Seek_Error_Rate        0x002f  100  100  050    Pre-fail  Always      -      0
  8 Seek_Time_Performance  0x0025  100  100  050    Pre-fail  Offline      -      0
  9 Power_On_Hours          0x0032  016  016  000    Old_age  Always      -      33942
10 Spin_Retry_Count        0x0033  232  100  030    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      5510
183 Runtime_Bad_Block      0x0032  100  100  001    Old_age  Always      -      0
184 End-to-End_Error        0x0033  100  100  097    Pre-fail  Always      -      0
185 Unknown_Attribute      0x0032  100  100  001    Old_age  Always      -      65535
187 Reported_Uncorrect      0x0032  001  001  000    Old_age  Always      -      2077
188 Command_Timeout        0x0032  100  092  000    Old_age  Always      -      388
189 High_Fly_Writes        0x003a  100  100  001    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  066  042  040    Old_age  Always      -      34 (Min/Max 27/36)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      156563
192 Power-Off_Retract_Count 0x0022  100  100  000    Old_age  Always      -      7667829
193 Load_Cycle_Count        0x0032  080  080  000    Old_age  Always      -      200862
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      5
197 Current_Pending_Sector  0x0032  100  100  000    Old_age  Always      -      0
199 UDMA_CRC_Error_Count    0x0032  200  200  000    Old_age  Always      -      0

SMART Error Log Version: 1
ATA Error Count: 2237 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2237 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 0a 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 08 00 74 c7 40 00      01:12:34.284  READ FPDMA QUEUED
  60 08 f8 e0 2a 68 40 00      01:12:34.258  READ FPDMA QUEUED
  61 08 f0 d0 c5 03 40 00      01:12:34.258  WRITE FPDMA QUEUED
  ec 00 00 00 00 00 a0 00      01:12:34.203  IDENTIFY DEVICE
  61 20 e0 78 22 70 40 00      01:12:34.170  WRITE FPDMA QUEUED

Error 2236 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 6a 08 74 c7 63  Error: WP at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 c8 40 36 2d 40 00      01:12:30.439  WRITE FPDMA QUEUED
  60 08 c0 e0 2a 68 40 00      01:12:30.425  READ FPDMA QUEUED
  60 08 b8 70 31 68 40 00      01:12:30.424  READ FPDMA QUEUED
  60 08 b0 88 2e 68 40 00      01:12:30.420  READ FPDMA QUEUED
  60 08 a8 60 31 68 40 00      01:12:30.419  READ FPDMA QUEUED

Error 2235 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 8a 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 88 00 74 c7 40 00      01:12:25.731  READ FPDMA QUEUED
  61 08 80 28 c4 64 40 00      01:12:25.231  WRITE FPDMA QUEUED
  61 20 78 c0 df 86 40 00      01:12:25.231  WRITE FPDMA QUEUED
  61 20 70 20 40 bb 40 00      01:12:25.231  WRITE FPDMA QUEUED
  60 20 68 20 c4 64 40 00      01:12:25.230  READ FPDMA QUEUED

Error 2234 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 f2 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 f8 10 e6 d4 40 00      01:12:20.865  READ FPDMA QUEUED
  60 20 f0 00 74 c7 40 00      01:12:20.865  READ FPDMA QUEUED
  61 20 e0 40 3c bb 40 00      01:12:20.865  WRITE FPDMA QUEUED
  61 08 08 d0 c5 03 40 00      01:12:20.865  WRITE FPDMA QUEUED
  ef 90 03 00 00 00 a0 00      01:12:20.865  SET FEATURES [Disable SATA feature]

Error 2233 occurred at disk power-on lifetime: 9865 hours (411 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 d2 08 74 c7 63  Error: UNC at LBA = 0x03c77408 = 63403016

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 d0 00 74 c7 40 00      01:12:17.068  READ FPDMA QUEUED
  61 18 c8 e0 e3 4b 40 00      01:12:17.066  WRITE FPDMA QUEUED
  60 18 c0 c0 ae e9 40 00      01:12:17.065  READ FPDMA QUEUED
  61 08 b8 d8 e3 4b 40 00      01:12:17.065  WRITE FPDMA QUEUED
  60 08 b0 b8 ae e9 40 00      01:12:17.065  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline      Completed without error      00%    33942        -
# 2  Short offline      Completed without error      00%    33942        -
# 3  Short offline      Completed without error      00%    33936        -
# 4  Short offline      Completed without error      00%    33936        -
# 5  Short offline      Completed: read failure      90%      7390        834289152
# 6  Short offline      Completed without error      00%        50        -
# 7  Short offline      Completed without error      00%        41        -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Kod:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:    TOSHIBA MK1059GSMP
Serial Number:    Y1MGP1P2T
LU WWN Device Id: 5 000039 3a290aa9d
Firmware Version: GU001C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:    512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:  ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Feb 14 00:08:39 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (  120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (  2) minutes.
Extended self-test routine
recommended polling time: ( 239) minutes.
SCT capabilities:       (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate    0x002f  100  100  050    Pre-fail  Always      -      0
  2 Throughput_Performance  0x0027  100  100  050    Pre-fail  Always      -      0
  3 Spin_Up_Time            0x0023  100  100  002    Pre-fail  Always      -      3118
  4 Start_Stop_Count        0x0032  100  100  000    Old_age  Always      -      8929
  5 Reallocated_Sector_Ct  0x0033  098  098  010    Pre-fail  Always      -      376
  7 Seek_Error_Rate        0x002f  100  100  050    Pre-fail  Always      -      0
  8 Seek_Time_Performance  0x0025  100  100  050    Pre-fail  Offline      -      0
  9 Power_On_Hours          0x0032  016  016  000    Old_age  Always      -      33875
10 Spin_Retry_Count        0x0033  253  100  030    Pre-fail  Always      -      0
12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      5492
183 Runtime_Bad_Block      0x0032  100  100  001    Old_age  Always      -      0
184 End-to-End_Error        0x0033  100  100  097    Pre-fail  Always      -      0
185 Unknown_Attribute      0x0032  100  100  001    Old_age  Always      -      65535
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0
188 Command_Timeout        0x0032  100  097  000    Old_age  Always      -      210
189 High_Fly_Writes        0x003a  100  100  001    Old_age  Always      -      0
190 Airflow_Temperature_Cel 0x0022  071  047  040    Old_age  Always      -      29 (Min/Max 22/37)
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      50654
192 Power-Off_Retract_Count 0x0022  100  100  000    Old_age  Always      -      23724394
193 Load_Cycle_Count        0x0032  086  086  000    Old_age  Always      -      141892
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      40
197 Current_Pending_Sector  0x0032  100  100  000    Old_age  Always      -      6864
199 UDMA_CRC_Error_Count    0x0032  200  253  000    Old_age  Always      -      0

SMART Error Log Version: 1
ATA Error Count: 28296 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 28296 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:37:04.906  READ DMA
  ef 10 02 00 00 00 a0 00      02:37:04.898  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:37:02.786  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:37:00.676  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:37:00.675  SET FEATURES [Enable SATA feature]

Error 28295 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:54.164  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:54.164  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:52.053  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:49.942  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:49.942  SET FEATURES [Enable SATA feature]

Error 28294 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:43.431  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:43.431  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:41.319  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:39.209  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:39.208  SET FEATURES [Enable SATA feature]

Error 28293 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:32.686  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:32.686  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:30.575  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:28.464  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:28.464  SET FEATURES [Enable SATA feature]

Error 28292 occurred at disk power-on lifetime: 33873 hours (1411 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 08 00 00 00 e0  Error: ABRT 8 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 00 00 00 e0 00      02:36:21.953  READ DMA
  ef 10 02 00 00 00 a0 00      02:36:21.953  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      02:36:19.841  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 00      02:36:17.730  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      02:36:17.730  SET FEATURES [Enable SATA feature]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline      Completed: read failure      90%    33874        0
# 2  Short offline      Completed: read failure      90%    33870        0
# 3  Short offline      Completed without error      00%      7300        -
# 4  Short offline      Completed without error      00%      7300        -
# 5  Short offline      Completed without error      00%      445        -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[dedito]

1

Spójrz na parametry 5, 196 i 197, jak się zmieniły w tych dwóch testach.
Dla mnie ten dysk już nie nadaje się na system.
Jak te atrybuty dalej będą rosnąć, to dysk nadaje się do utylizacji.